How do you read a motor nameplate?

What does a motor nameplate tell you?

This data tells you at which voltage the motor is made to operate. Nameplate-defined parameters for the motor such as power factor, efficiency, torque and current are at rated voltage and frequency. When the motor is used at other voltages than the voltage indicated on the nameplate, its performance will be affected.

What do the numbers on an electric motor mean?

The configuration number tells you how many electromagnets there are on the stator, and the number of permanent magnets there are on the rotor. The number before the letter N shows the number of electromagnets there are in the stator. The number before the P shows how many permanent magnets there are in the rotor.

What is IM in motor nameplate?

The international standard IEC 34-7 gives the mounting type of the motor in the form of two letters, IM (International Mounting) and four digits. Figure 6 shows some of the most common designs. The motor slip can be calculated, since the nameplate gives the rated speed and frequency.

Which power is mentioned on a name plate of a motor?

8. Which power is mentioned on a name plate of a motor? Explanation: Name plate of the motor shows rated values i.e. rated speed, rated current, rated voltage. It also shows output power available at shaft when all other quantities are set to rated values.

IT IS INTERESTING:  How do you read a motor nameplate?

What is a motor code?

Codes are defined in MG 1-10.37. 2 by a series of letters from A to V. Generally, the farther the code letter from A, the higher the inrush current per hp. A replacement motor with a “higher” code may require different upstream electrical equipment, such as motor starters.

How do I find my motor details without nameplate?

Use a strobe tachometer to determine motor RPM and then set up a generic motor in the database for that RPM. If loading cannot be provided by the operator use the acquired data and RPM to approximate loading. You can view the power factor for a value around 88 to 92 to approximate full load.

How do you identify a universal motor?

Look for the stator core construction and rotor. If there is no commutator, then it is a AC motor. If there is a commutator and brushes, it may be either a DC motor or an AC commutator motor (Universal motor).

How do you identify a motor pole?

The pole count of a motor is the number of permanent magnetic poles, north and south, on the rotor. There is always the same number of north and south poles on the rotor. For example, in a 12 pole motor, there are 6 north poles and 6 south poles. This motor would also be considered a 6 pole-pair motor.

How do you read a motor number?

The RPM listed on the nameplate is the shaft speed for the motor. The speed of the motor is directly related to the frequency of the line voltage and the number of poles in the motor. At 60 Hz, a 4 pole motor will rotate at approximately 1800 RPM (7200/4 poles).

IT IS INTERESTING:  Frequent question: What does AC in a car do?

What does the KV number mean on a brushless motor?

The Kv rating of a brushless motor is the ratio of the motor’s unloaded rpm to the peak voltage on the wires connected to the coils. Knowing the Kv rating of a motor will help you determine how fast that motor will rotate when a given voltage is applied to it.

What is motor rated current?

Motor rated current calculation

Voltage: The phase-to-phase voltage for a 3-phase supply. Rating: The power rating of the motor in kW.